Impression Taking Preparation
![](https://spiraltech.com/wp-content/uploads/2017/06/impression_taking_prep-1024x659-1024x659.png)
- After selecting the angulation of the multi-unit connectors, use a carrier to place the base connection into the implant. Angled abutments are transferred to the implant with the assistance of the carrier to the multi-unit.
- Screw the multi-unit holder and hand driver to the selected implant.
- Tighten the multi-unit with the hand driver up to 35Ncm.
- Unscrew and remove the multi-unit carrier.